2. Adjust volume level.
3. Switch to desired channel.
4. If at any time a call comes through, it will be heard at
the volume level set.
button to restart
Emergency sequence.
Programmable ButtonsÕ Audio Indicators
Programmable
Buttons
Positive
Indicator Tone
Negative
Indicator Tone
Scan oper-
ation
Tx Power
Radio transmits
at
power
Squelch
Radio operates in
radioÕs option
board
Keypad Lock
RadioÕs keypad is
use the
repeater
Radio uses the
repeater
knob clockwise. Self
Test Pass Tone will sound and green LED will light up
if radio powers up successfully. If radio fails power up,
the Self Test Fail Tone will sound.
knob counter-clockwise,
until click is heard.
Adjusting the RadioÕs Volume
key; until continuous
tone is sounded.
2. Turn
knob to adjust volume
level.
3. Release
key when desired level is
achieved.
Selecting a Radio Channel
knob clockwise or counter-
clockwise to reach desired channel.
knob to change to required
channel.
2. Press
, and speak clearly with mouth about 2.5
to 5 cm (one to two inches) away from microphone.
3. Release
PopQuickRef.frm Page 3 Thursday, May 3, 2001 9:41 AM