Option Board Installation 3-15
8.1 Configuring the Voice Storage Option Board
1. Connect the radio to your computer following the instructions outlined in CPS Programming
Setup on page 4.3.
2. Start up the CPS, and read the radio’s codeplug.
3. Choose Miscellaneous from the Per Radio drop-down menu.
4. In the Miscellaneous dialog box, click on the Global and choose Voice Storage from the
Option Board Type
.
5. Choose Signalling Definition from the Per Radio drop-down menu. In the Signalling Defini-
tion dialog box, click on the Voice Storage check box to activate voice storage.
To Next Page
Loading...
