Motorola GP338

Radio Calls
22
English
RADIO CALLS
EMERGENCY ALARM
Your radio can be programmed to give you a
one-button quick access to call a particular radio
or center (predefined by your dealer) in
emergency situations. This is the Emergency
Alarm.
When you make an Emergency Alarm, your
radio goes into an Emergency state, which can
be programmed to
• continually give visual and audio feed-
back,
• give no audio feedback with optional
visual feedback, or
• give no audio/visual feedback, but the
radio can receive and transmit.
The E icon will light up on the LCD screen,
when your radio is in the Emergency state.
1. Press the Emergency button to initiate an
Emergency Alarm.
2. Press and hold the Emergency button to cancel
the Emergency Alarm.
3. Press and release the Emergency button to
restart the Emergency sequence.
RADIO CALL LIST
The K icon will light up on the LCD screen
when you edit the radio call list.
Note: The radio will not receive any
calls when you are editing the
radio call list.
Editing an Entry (for keypad radios only)
1. Press ) to enter Menu Mode.
2. Press + or ? to scroll to the Program
Lists menu item.
3. Press ) to select this option.
4. Press + or ? to scroll to the RadioCall
List menu item.
5. Press ) to select this option.
Program Lists
Radiocall List
#WarisPreUser.book Page 22 27, May 1998, 9:44 AM