Motorola GP338

33
Phone
English
PHONE
PHONE
You can use your radio to connect to a phone
line to make a phone call.
To do this, your radio must send an access code
to a station that connects it to a phone line. After
you have finished your call, the radio has to
send a deaccess code to shutdown the
connection to the phone line.
MAKING A PHONE CALL
You can make a phone call by using the menu or
by using the programmed phone button. The D
icon will light up on the LCD screen when you
are in phone mode.
A complete phone session consists of
• entering the phone mode
• sending the access code
• sending the phone number
• having the phone conversation
• ending the phone call.
Entering the Phone Mode
Before you can make a phone call, you must
enter the radio’s phone mode.
1. Press the Phone button.
To enter the phone mode via the menu:
1. Press ) to enter Menu mode.
2. Press + or ? to scroll to the Phone menu
item.
3. Press ) to select this item. The screen will
show the last phone number dialled (shown
here as 3334567).
Sending the Access Code
Your radio can be programmed to send the
access code in any of the following three ways:
Phone
3334567
#WarisPreUser.book Page 33 27, May 1998, 9:44 AM