MOTOROLA and the Stylized M Logo are registered in the US

Patent & Trademark Office. The use of wireless devices and

their accessories may be prohibited or restricted in certain areas.

Always obey the laws and regulations on the use of these

products. The Bluetooth trademarks are owned by their

proprietor and used by Motorola, Inc. under license. All other

product or service names are the property of their respective

owners.

Motorola, Inc.

Consumer Advocacy Office

1307 East Algonquin Road

Schaumburg, IL 60196

www.hellomoto.com

1-877-MOTOBLU

1-888-390-6456 (TTY/TDD United States for

hearing impaired)

Guide Number: 6809499A88-O

H700

Bluetooth®

Handsfree Headset

Before using this product, read the Important Safety and Legal

Information pamphlet and follow its instructions.

TROUBLESHOOTING

My headset will not enter pairing mode.

Make sure that any devices previously paired

with the headset are turned off. If the indicator

light is flashing in blue, turn off the other device

and wait for 10 seconds. The indicator light

becomes steadily lit in purple indicating the

headset is now in pairing mode.

My phone doesn't find my headset.

Make sure the indicator light on your headset is

on (lit in purple) and steady when your phone is

searching for devices (see step 3).

My headset worked before but now it's not

working.

Make sure your phone is on and the Bluetooth

feature is turned on in your phone (see step 2).

If the Bluetooth feature was turned off or was

turned on only temporarily, you may need to

restart the Bluetooth feature (see step 2) and

pair your phone and headset again (see step 3).

Support.

If you need more help, contact us at

1-877-MOTOBLU or visit us at

www.hellomoto.com/bluetooth and click

Support

Take a moment before you get started to

familiarize yourself with your new

H700 Headset.

BEFORE YOU

BEGIN

Get Connected in

4 Quick Steps

1 - CHARGE

2 - START

BLUETOOTH

FEATURE

3 - PAIR

4 - TEST AND

USE

CHARGE

Your Headset's Battery

Plug the Motorola charger into the end of

the headset.

The indicator light turns red when the

battery is charging. It may take up to 1

minute for the indicator light to turn on.

When the headset's battery is fully charged

(about 2 hours), the indicator light turns

green.

Disconnect the charger.

Note: Headset is not functional while charging.

START BLUETOOTH

FEATURE

Your Phone

Press (Menu) > Settings > Connection >

Bluetooth Link > Setup.

Scroll to Power.

Select Change.

Scroll to On.

Press Select to turn on the Bluetooth

feature. The Bluetooth feature remains on

until you turn the feature off.

Note: These steps are for most Motorola phones. For other

phones, see your phone's user's guide.

Your phone's Bluetooth feature is off by default.

To use your headset, you must turn on the

Bluetooth feature in your phone.

For most Motorola phones (at the main menu):

PAIR

Your Headset

Before you can use your headset, you must pair

(link) it with your phone.

Step A - PUT THE HEADSET IN PAIRING

MODE

The headset indicator light will be steadily lit in

purple when in pairing mode. To place the

headset in pairing mode:

If the headset has never been paired with

another device, simply open the headset

boom. The indicator light becomes steadily lit

in purple.

If the headset has previously been paired

with other devices, first ensure those

devices are turned off. Then open the headset

boom and the indicator light flashes in blue.

After about 5 seconds, the indicator light

becomes steadily lit in purple.

If the headset does not enter pairing mode,

see TROUBLESHOOTING for help.

PAIR CONTINUED

Your Phone

Step B - SET YOUR PHONE TO LOOK FOR

YOUR HEADSET

For most Motorola phones:

On your Motorola phone, press (Menu) >

Settings > Connection > Bluetooth Link >

Handsfree > Look for Devices.

The phone lists Bluetooth devices it finds.

Select Motorola H700.

Select OK or Yes to pair your headset with

your phone.

Enter the passkey: 0000

Select OK.

When your headset successfully pairs with

your phone, the indicator light changes from

steadily lit to flashing blue.

Note: These steps are for most Motorola phones. For other

phones, see your phone's user's guide.

TEST AND USE

Your phone and headset are now paired

and ready to make and receive calls.

To make a call:

Open the headset boom and place the

headset over your ear.

On the phone, dial the number you want to

call and press SEND key on your phone.

If your phone and headset are successfully

paired, you will hear ringing on the headset.

After you have successfully paired your

phone and headset, you don't need to

repeat these steps. For daily use, ensure

that your headset is turned ON and that

your phone's Bluetooth feature is ON.

To save battery power, turn OFF the

headset when you don't use it for an

extended time by closing the boom.

USING YOUR H700

See

Features and

Functions Guide

on the reverse side

for information on

using your H700.

Volume

Buttons

Boom

Multi-Color

Indicator Light

Call

Button

Microphone

Speaker

(on reverse

side)

Motorola H700 - Using Your H700

Table of Contents

Other manuals for Motorola H700

Related product manuals