Motorola HS830 Quick Start

4
4 Peel the backing off the back of
the adapter and mount the adapter
to the helmet in the desired
location.
5 Peel the backing off the Velcro
®
on
the speaker. Place the speaker
inside the helmet where it will be
close to your ear.
Alternatively, insert the tie wrap
through the slots on the back of
the speaker and use the tie wrap
to strap the speaker inside the
helmet. You may have to push the
tie wrap through the liner of the
helmet.
Action
5
Installing the Wireless
Module
6 Point the microphone toward your
mouth.
For best performance, the side of
the microphone with the white dot
on it should be closest to your
mouth.
Action
1
Press the outside latch to open the
helmet adapter cover.
Action
6
2 Insert the HS830 Wireless Module
into your helmet adapter. Slide
your Wireless Module completely
onto the audio plug in the helmet
adapter.
3 Close the helmet adapter cover
completely to secure the Wireless
Module.
4 While wearing the helmet, point
the microphone boom close to
your mouth for best voice pickup.
Action
Wireless Module
Latch
Helmet Adapter
Microphone
Plug
7
Pairing Your Wireless
Module and Phone
With the headset and phone near each
other:
Action
1
With the wireless module off,
press and hold the MFB until the
LED remains on (about 5
seconds).
2 Perform a device discovery from
your phone.
For details on device discovery
for your phone, refer to the
phone’s user’s guide.
When the scan is complete, your
phone displays the devices found.

Motorola HS830 Specifications

General

Brand	Motorola
Model	HS830
Category	Adapter
Language	English