96
MOTOtalk
TM
switching to MOTOtalk
To set your phone to MOTOtalk:
1
From the home screen press
/
>
p
>
MOTOtalk
and press
r
.
2
Select
Go to MOTOtalk
.
Switching to MOTOtalk Please Wait
displays.
After a few seconds, the MOTOtalk idle
screen displays. When
MT Ready
displays,
you can begin using MOTOtalk.
While in MOTOtalk, this icon
4
displays.
exiting MOTOtalk
To switch to network mode:
1
From the MOTOtalk idle screen, press
/
>
p
>
MT Options
and press
r
.
2
Select
Exit MOTOtalk
.
Switching to Network Please Wait
displays. After a few
seconds, the network idle screen appears.
talk range
While in MOTOtalk mode, phones should be a
minimum of 6 feet apart to maximize
performance and improve transmission range.
channels and codes
Your phone has 10 channels and 15 codes.
Channels are divided into sets of frequencies.
Other parties may be talking on the same
channel. Codes minimize interference from
other parties when you are sharing the same
channel.
MOTOtalk opens to the last code and channel
used on your phone. You can view the code
and channel your phone is currently set to on
the MOTOtalk idle screen.
To Next Page
Loading...
