How to fix Motorola IMPRES NNTN7063 when there is no charger indication?
If your Motorola Battery Charger shows no indication of charging, there could be a couple of reasons. First, ensure the radio with battery, or the battery alone, is correctly inserted. Second, check that the power cord is securely plugged into both the charger and a working AC outlet. Also, make sure the outlet has power. If necessary, replace the fuses.
What to do if Motorola IMPRES NNTN7063 Battery Charger has blinking red indication?
If your Motorola Battery Charger is showing a blinking red light, it could be due to a couple of issues. First, try removing the battery from the charger and then reinserting it. If that doesn't work, ensure that you are using a Motorola-authorized battery (check Table 4 for a list of authorized batteries). Other batteries might not charge properly. Also, disconnect the charger from power and use a clean, dry cloth to clean the gold metal charging contacts on both the battery and the charger. As a last resort, try replacing the battery.
What to do if Motorola IMPRES NNTN7063 has no charger indication?
If your Motorola Battery Charger shows no indication of charging, there could be a couple of reasons. First, ensure that the radio with the battery, or the battery alone, is correctly inserted into the charger. Second, check the power supply: make sure the power cord is securely plugged into both the charger and a working AC outlet. Also, verify the outlet has power. If necessary, replace the charger's fuses.
Why is my Motorola IMPRES NNTN7063 Battery Charger blinking red?
A blinking red light on your Motorola Battery Charger usually indicates a problem with either the battery connection or the battery itself. Try removing the battery and then reinserting it into the charger. Also, make sure you are using a Motorola-authorized battery. If not, other batteries might not charge. Clean the gold metal charging contacts on both the battery and the charger with a clean, dry cloth. If the issue persists, consider replacing the battery.
General| IMPRES | Yes |
|---|---|
| Charging Slots | 1 |
| Compatibility | IMPRES batteries |
| Charging Time | Approximately 2.5 hours |
| Chemistry | Lithium-Ion |
| Input Voltage | 100-240V AC, 50/60Hz |
To Next Page