Motorola L702 Series User Manual

Doc Title : Product Data - User Manual Revision : R.00
Model : Motorola L702 series Page(s) : 24 of 36
This document contains confidential and proprietary information of VTech Telecommunications Ltd
4.13
Personal
Settings
Menu map
MAIN MENU DATE& TIME PHONEBOOK SETUP HS SETUP BS ANSWER MACHINE RESET SETTINGS
SUB MENU YEAR
DATE
TIME
VIEW
ADD
EDIT
DELETE
DELETE ALL
PB CAPACITY
SPEED DIAL
RINGER TONE
RINGER VOLUME
KEY TONE
LOW BATT TONE
OUT RANGE TONE
HANDSET NAME
LANGUAGE
LCD CONTRAST
REGISTRATION
DIAL MODE
FLASH TIME
AREA CODE
ANSWERER ON (if
answering machine is off)
Or
ANSWERER OFF (if
answering machine is on)
ANSWERER MODE
RINGS TO ANSWER
ANNOUNCEMNET
RECORD MEMO
CALL SCREENING
DEL ALL OLD MSG
REMOTE ACCESS
SECURITY CODE
CLR VOICE MAIL
ALL SETTINGS
1. Press MENU/SELECT.
2. Press UP or DOWN to scroll through the menu.
3. Press MENU/SELECT for opening sub-menus and /or saving.
Press TALK OFF/BACK to go back to the previous menu level or cancel an action.
If you do not press any button on the handset for 30 seconds, the display will automatically return to standby. It will
also return to standby when the handset is placed on the base or charger.
4.14
Intercom
This feature is only available when there are at least two registered handsets. It allows you to make internal calls,
transfer external calls from one handset to another handset, and use the conference option.
4.14.1 Calling another handset
1. Press INT. Except for the originating handset, all registered handsets will be displayed in the list.
2. Press UP or DOWN to select the handset you want to call.
3. Press MENU/SELECT to call the handset.
4. Press TALK OFF/BACK to hang up.
NOTE
If the handset is not within the valid operation range, this function may not be available. During an intercom call,
you will hear an alert tone if there is an incoming external call. You need to press TALK OFF/BACK to hang up the
intercom call before answering the incoming external call.
4.14.2
Transferring
a
call
to
another
handset
1. During an external call, press INT.
–Your call is put on hold.
2. Press UP or DOWN to select the handset you want to call.
3. Press MENU/SELECT to call the handset.
4. When the other handset answers by pressing TALK ON/FLASH or SPEAKER, press TALK OFF/BACK to
transfer the call. If the other handset does not answer, press MUTE/CLEAR/X to talk to your caller again.
4.14.3 Three-party conference call
1. During an external call, press INT.
–Your caller is put on hold.
2. Press UP or DOWN to select the handset you want to call.
3. Press MENU/SELECT to call the handset.
4. When the other handset answers the intercom call, press MENU/SELECT on the calling handset to set up the
conference call.
5. Press TALK OFF/BACK on any handset to end a three-party conference call and leave the other handset
engaged with the caller.
NOTE
During an external call, pressing TALK ON/FLASH or SPEAKER on any handset will join in the call and set up a
conference call.

Motorola L702 Series Specifications

General

Brand	Motorola
Model	L702 Series
Category	IP Phone
Language	English