PAGE 4
INSTRUCTION GUIDE
PAIRING THE LI4278 TO A TABLET
LI4278 LINEAR IMAGER
PAIRING THE LI4278 TO iOS
Select Settings from the iPad Desktop:
3
Turn Bluetooth On:
4
Choose LI4278 from available Bluetooth
devices. The serial number of the device
assists in identifying the correct device:
5
Tap the LI4278 to select it. The iPad
automatically connects to the linear imager.
The scanner emits a short low beep followed
by a short high beep indicating the successful
connection.
6
To Next Page
Loading...
