EasyManua.ls Logo

Motorola Symbol LS3578-ER User Manual

Motorola Symbol LS3578-ER
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Symbol LS3578-ER scanner programming guide for Mobile Bale Scan
1. Reset the scanner to Factory Defaults
2. Set the Bluetooth PIN code to Variable
3. Enable Bluetooth HID
Question and Answer IconNeed help?

Do you have a question about the Motorola Symbol LS3578-ER and is the answer not in the manual?

Motorola Symbol LS3578-ER Specifications

General IconGeneral
Scan PatternSingle line
Light Source650 nm visible laser diode
Scan Rate100 scans per second
Decode Capability1D barcodes
Humidity5% to 95% relative humidity, non-condensing
ConnectivityBluetooth, USB
Radio RangeUp to 100 meters
Operating Temperature-10°C to 50°C (14°F to 122°F)
Storage Temperature-40°C to 70°C (-40°F to 158°F)
Drop SpecificationWithstands multiple 1.8 m (6 ft) drops to concrete
Weight240 g (8.5 oz)
BatteryRechargeable Lithium-ion
Resolution0.1 mm (4 mil)
InterfaceRS-232, USB, Keyboard Wedge
Supported BarcodesUPC, EAN, Code 39, Code 128
Dimensions7.6 cm

Summary

Scanner Reset and Bluetooth Setup

Reset Scanner to Factory Defaults

Resets the scanner to its original factory default settings via a programmed barcode.

Set Bluetooth PIN Code to Variable

Configures the scanner's Bluetooth Personal Identification Number (PIN) to a variable setting.

Enable Bluetooth HID Mode

Activates the Human Interface Device (HID) profile for Bluetooth communication.

Configure Scan Suffix and Data Transmission

Set Scan Termination Character

Configures a '.' as the termination character for scans to advance to the next field.

Scan Options and Data Suffix

Defines scan options and sets the data suffix for transmission.

Scan Save Command

Executes the save command for the configured scan options.

Scan Suffix Sequence

Scans a sequence of barcodes (1, 4, 0, 6) to set the scan suffix.

Bluetooth Pairing and Connection

Enable Discovery Mode

Enables the scanner's discovery mode for pairing with a device.

Pair Bluetooth Device

Initiates Bluetooth pairing by searching for devices and selecting the scanner.

Scan Input for Pairing Key

Enter Pairing Key via Scans

Scans numerical barcodes (0-9) corresponding to a presented key for pairing.

Confirm and Save Pairing

Scans the 'Save' barcode to confirm the entered pairing key and complete the process.

Cancel Pairing

Scans the 'Cancel' barcode to abort the pairing process.

Related product manuals