Motorola LS350 - Alerts; Selecting the Incoming Message Alert

11
Selecting the Incoming Message Alert
You can set your pager’s incoming message alert to a vibration
alert or you can select one of the musical alerts.
➊ From the Standby screen, press t twice.
➋ Press and release r until SELECT ALERT
is displayed, then press s.
The current alert setting is displayed.
➌ Press r until your choice of ALERT AUDIO
or ALERT VIBE is displayed.
Note: If ALERT AUDIO is selected, the
pager automatically goes into the set-
audio alert mode, refer to “Alert Audio”
on page 12.
m 82 f ojlbe
SELECT ALERT
m 82 f ojlbe
ALERT VIBE
m 82 f hjlbe
ALERT AUDIO
ALERTS
1031B55-B.fr5 Page 11 Friday, April 23, 1999 3:15 PM