Need help?Do you have a question about the Motorola MINITOR 7 and is the answer not in the manual?
General| Type | Pager |
|---|---|
| Battery | Single AA Battery |
| Alert Type | Vibrate |
| Alert Tones | Multiple programmable tones |
| Display | LCD |
| Programming | PC Programmable |
Legal notice about copyrighted material and reproduction rights.
Lists registered and other trademarks used in the document.
Explains licenses granted upon product purchase.
Mentions Open Source software used under license.
Information regarding WEEE directive compliance and disposal.
Notes on feature applicability and parameter dependency.
Explains the status and corresponding LED indicator behavior.
Details the function switch operation, modes, and channel monitoring.
Explains the multifunctional uses and procedures for the reset button.
Instructions for attaching the belt clip to the device.
Instructions for removing the belt clip from the device.
Information about the device's battery pack.
Procedure for attaching the battery pack to the device.
Procedure for removing the battery pack from the device.
Steps to power on the MINITOR 7 device.
Steps to power off the MINITOR 7 device.
How to control the audio volume on the device.
Guides users through initial setup and configuration for operation.
Sets the length for storing incoming messages.
Allows selection of voice types for announcements.
Configures voice announcements for function switch changes.
Enables/disables voice announcements for battery status.
Sets page alert volume to its loudest setting.
Sets the duration for waiting before scanning priority channels.
Sets the duration of page alerts.
Enables or disables reminders for unread messages.
Overrides vibrate setting for specific call addresses to tone alerts.
Enables or disables warning tones for critical situations.
Procedures to activate and deactivate warning alert mode.
Disables channel monitoring when pressing the Reset button.
Keeps the device powered on regardless of knob position.
Configures the device sleep cycle to conserve battery.
Configures different modes and operations for function switch positions.
Sets the type of alerts (tone, vibrate, or both).
Configures receiving frequencies and parameters like bandwidth and coding.
Adjusts the squelch sensitivity level on the device.
Details how voice messages are stored and recording conditions.
Manages stored voice messages using multifunction buttons.
Identifies the product category covered by the warranty.
Details warranty coverage period for products and accessories.
Outlines general terms and conditions of the warranty.
Explains specific legal rights that may vary by state.
Provides instructions on how to obtain warranty service.
Lists items and conditions excluded from warranty coverage.
Details patent and software related terms within the warranty.
Specifies the governing law for the warranty terms.
To Next Page