31
Belt Clip
Your pager has a removable belt clip. To remove and replace the belt clip,
follow the instructions below.
Removing the Belt Clip
➊ Insert the pointed end of a non-metallic
item (such as a pen cap) into the top
end of the belt clip as shown in the
illustration.
➋ Push down on the tab and slide belt clip
forward to separate it from the pager.
Replacing the Belt Clip
➊ Align the belt clip with the belt clip holder.
➋ Slide the belt clip into the holder until it snaps back into place.
Push down on tab
to release
belt clip
BELT CLIP
1031B55-B.fr5 Page 31 Friday, April 23, 1999 3:15 PM
To Next Page
Loading...
