Motorola MBP20 - Parent Unit Settings; Language Settings; Timer Configuration

Parent unit settings 13
NOTE
The parent unit still carries on audio monitoring even if the
video capture is turned off.
To switch the video feed from the current monitoring parent
unit to the other parent unit which is not in video monitoring
mode:
1. Press
6 on the current video monitoring parent unit,
the screen will be blank without video image received.
2. Press
6 on the other parent unit which is NOT in
video monitoring mode, the video feed will be
transferred to that parent unit.
4. Parent unit settings
4.1 Set the language
1. Press 1 to access main menu.
2. Press
+ or - to select LANGUAGE .
3. Press
1 to enter the sub-menu.
4. Press
+ or - to select the desired language.
5. Press
1 to confirm.
4.2 Timer
The timer function serves as an alarm reminding you
things-to-do for the baby such as typically milk feeding,
checking up appointment and medication.
4.2.1 Turn on the timer
1. Press 1 to access main menu.
2. Press
+ or - to select TIMER .
3. Press
1 to enter the sub-menu.
4. Press
+ or - to select ACTIVATION .
5. Press
1 and then + or - to select ON or OFF .
6. If you select
ON , your will be prompted to select the
alarm frequency from
ONCE or REPEATED .
7. Press
1 to confirm.