Motorola MBP26 - Parent Unit Menu Options; Volume Adjustment; Brightness Control; Digital Pan and Tilt

Parent Unit Menu Options 13
ENGLISH
4. Parent Unit Menu Options
4.1 Volume
1. While in monitor mode, press the + UP button or - DOWN button
to select the desired volume level from level 1 ~ 8. (The default
volume level setting is level
4.)
4.2 Brightness
1. Press the button and the first menu option will appear.
2. To select the BRIGHTNESS icon press the button.
3. Press the
+ UP button or - DOWN button to select the desired
brightness level from level 1 ~ 8. (The default brightness level setting
is level
4.)
4.3 Digital Pan and Tilt
1. Press the Pan & Tilt button.
2. Press the
+ UP button or - DOWN button to move the display view
up or down, or press the and buttons to pan the display view
left and right.
4.4 Alarm
1. Press the button and the first menu option will appear.
2. Press the
- DOWN button to show the ALARM icon and press
button to confirm.
3. Press the
+ UP button or - DOWN button to select the alarm time
(
6h , 4h , 2h ). (The default setting is Alarm OFF (X).)
If an alarm time is selected, the parent unit will beep at the end of the
selected 6, 4 or 2 hour period, and the alarm icon will flash red. The
alarm is cancelled after about 60 seconds or by pressing any button
on the parent unit.
Set the alarm again if you want another alarm call.