Getting Started 9
ENGLISH
2. Place the battery cover over the compartment and gently tighten the
screw in a clockwise direction using a Small cross head or Flat end
screwdriver.
2.3 Parent Unit Power Supply
IMPORTANT
Installing the rechargeable battery pack and charge it fully before first time use
is recommended. This allows the Unit to operate on battery in the event of a
power failure, or when moving to a different room.
1. Connect the small plug of the power adapter to the Parent Unit and the
other end into the electrical outlet. Only use the enclosed power adapter
(6V DC/500mA) with the slightly smaller DC plug.
2. Press and hold the
P POWER ON/OFF button for 1 second to turn ON
the Parent Unit.
3. Once the Baby and Parent Units are switched on, the display on the Parent
Unit will show the video captured by the Baby Unit.
To Next Page
Loading...
Need help?
General
