Motorola MBP483-3 - Remove a Baby Unit; Set Screen off Time for the Parent Unit; Zoom, Pan or Tilt

18 Parent Unit Menu Options
4.4.3 Temperature Alert
You can set whether to receive an alert when the room temperature goes
beyond the temperature range.
1. Press M when the Parent Unit is in camera viewing mode.
2. Press
< or to scroll to .
3. Press or to scroll to and press the O button.
4. Press or to choose
On or Off .
5. Press O to confirm your selection.
4.5 Remove a Baby Unit
1. Press M when the Parent Unit is in camera viewing mode.
2. Press
< or to scroll to .
3. Press or to select the desired Baby Unit (
1 , 2 , 3 or 4 ).
4. Press O, then press
< or to choose YES or NO .
5. Press O to confirm your selection.
NOTE
You cannot remove a Baby Unit if it is the only one paired.
4.6 Set Screen Off time for the Parent Unit
You can set the screen off time for the Parent Unit after it is in idle mode for a
specific time interval.
1. Press M when the Parent Unit is in camera viewing mode.
2. Press
< or to scroll to .
3. Press or to select (
60mins , 30mins , 5mins or OFF ).
4. Press O to confirm your selection.
4.7 Zoom, Pan or Tilt
You can zoom in or out while viewing the image from Baby Unit.
1. Press to zoom in.
2. Press and hold
<, , or to move the zoomed image left, right, up
or down correspondingly.
3. Press to zoom out.