Enhance sound
About Dolby Atmos
Use preset equalizers to enhance your phone’s speaker sound, or apply sound profiles to your headphones
or other connected device based on the type of media playing.
Set sound profile for headphones or connected device
You can select a preset sound profile for your headphones or other connected device, and your phone will
remember the next time you connect it.
1. Connect your headphones or other audio device.
2. Go to Settings > Sound & vibration > Dolby Atmos.
3.
Make sure it's on .
4. Select an effect:
•
3D Stereo: Immersive and spatial sound experience, great for gaming
•
Theater: Optimized for surround sound
•
Live: Simulates the effect of a live concert
•
Custom: Select a preset equalizer profile and a surround sound option
Silence calls & notifications
When you're busy, use Do Not Disturb to mute ringtones for incoming calls, stop vibration, and block
notifications.
Quickly turn Do Not Disturb on or off
Turn it on
1.
Open quick settings and tap .
You'll see in the status bar when Do Not Disturb is on.
2.
To change how long it stays on, in quick settings, touch & hold , tap Duration for Quick Settings,
and then choose one:
•
To keep it on indefinitely, tap Until you turn off.
•
To select a duration, tap For 1 hour, then tap + or - to adjust the time.
•
To choose each time you turn Do Not Disturb on, tap Ask every time.
Turn it off
Open quick settings and tap .
If it's turning itself on again, but you don't want it to:
Settings : Sound & vibration
151
To Next Page
Loading...
