Motorola moto g24 POWER - Remove screen lock; Quickly tighten lock screen security; Set advanced lock options; Set time before locking

Tips:
•
You can swipe up from anywhere on the screen when unlocking. You don't need to touch the
icon.
•
Some of these options aren't available if you added a VPN or a work (corporate) email account to
your phone.
Remove screen lock
1. Go to Settings > Security & privacy.
2. Tap Screen lock.
3. Enter your current PIN, password, or pattern to confirm your identity.
4. Select None or Swipe.
Quickly tighten lock screen security
Unlocking with the fingerprint sensor and setting up automatic unlocking make it easier to keep your phone
secure and minimize when you need to enter your PIN, pattern, or password. But sometimes you need to
trade convenience for more security. You can temporarily tighten locks and prevent lock screen
notifications.
1.
Swipe down from the top of the screen twice, then touch > Power off.
Or, press & hold the Power + Volume up buttons simultaneously, then touch Power off.
2. Touch Lockdown.
Your fingerprint sensor and automatic unlock settings are disabled and notifications won’t be displayed
on your lock screen.
3. To exit Lockdown, unlock your phone with your PIN, pattern, or password.
Set advanced lock options
Use these options to control when your phone locks and whether your code is visible when you unlock.
You can also control what content is included on your lock screen.
Set time before locking
Unless kept unlocked automatically, your phone locks the screen five seconds after the screen turns off.
To increase or decrease the amount of time before automatically locking the screen:
1. Go to Settings > Security & privacy.
2.
Next to Screen lock, tap .
3. Tap Lock after screen timeout, then select a duration.
Settings : Security & privacy : Lock and unlock phone
197