Motorola moto g9 POWER - Connect a MIDI device

3. Touch & hold the 󶍔le.
4.
Touch and select Bluetooth.
5. Touch the name of the paired device.
During 󶍔le transfer, you’ll see in the status bar. To check the status, see the noti󶍔cation.
Receive 󶍔les over Bluetooth
1. Pair your phone with the device sending the music.
2. On the device sending the music, start the 󶍔le transfer, following device’s instructions.
3. When you receive the Bluetooth noti󶍔cation on your phone, swipe down and touch it, then touch Accept.
During 󶍔le transfer, you’ll see in the status bar. To check the status, open the noti󶍔cation.
The 󶍔les are saved in Music/Bluetooth, where music apps will 󶍔nd them. You’re ready to listen!
Tip: To see Bluetooth 󶍔les you received, go to Settings > Connected devices > Connection preferences >
Files received via Bluetooth.
Transfer music from your computer
To move your music from your computer to your phone, connect them with a USB cable and copy the 󶍔les to
your phone’s Music folder.
Connect a MIDI device
To connect a MIDI device:
1. Make sure you have:
•
A USB cable that's capable of data transfer and isn't for charging only.
•
A USB OTG adapter cable, if needed.
2. Turn the phone and MIDI device on.
3. Connect them with the USB cable (and adapter if needed).
4. Unlock the phone.
5. Change the USB connection type to allow MIDI connection:
a. Swipe down from the top of your home screen and touch the Charging this device via USB
noti󶍔cation.
b. Touch MIDI.
Music
114