Motorola moto g9 POWER - Use paired device; Reconnect with Bluetooth device; Turn off Bluetooth scanning; Change phones name

Tip: Bluetooth connections can really drain your battery. Save power by turning Bluetooth o󶍓 when you're
not connected to a device.
After pairing with a device, you’ll need to set sharing options and then you can use Bluetooth to:
•
Make or receive calls with a headset
•
Make or receive calls and play music over your car's audio system
•
Transfer music
•
Share photos
•
Share contacts
•
Share your phone's internet connection with your computer
To set sharing options:
1. Go to Settings > Connected devices.
2. Do one of the following:
•
For a currently connected device, touch the device name.
•
For a previously paired device, next to the device name touch .
3. Turn sharing options on or o󶍓.
4. On the paired device or in the device’s app, look for Bluetooth settings to review and adjust. For more
information, see the paired device manufacturer’s instructions.
Reconnect with Bluetooth device
1.
Open quick settings and touch to turn it on.
2. Turn on the Bluetooth device.
Turn o󶍓 Bluetooth scanning
When Bluetooth is o󶍓, your phone can still scan and automatically connect to a previously paired device. To
prevent this, turn o󶍓 Bluetooth scanning.
To turn o󶍓 scanning:
1. Go to Settings > Location.
2. Touch Wi-Fi and Bluetooth scanning.
3.
Turn Bluetooth scanning o󶍓 .
If you turn this o󶍓, apps that use your location won't work as well.
Change phone's name
Your phone name identi󶍔es your phone in a Bluetooth network. You can change the name.
1. Go to Settings > Connected devices.
2.
Touch > Device name.
Connected devices
132