58 MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION
Standard Radios without Data Expansion Head Enhanced
For standard MTM800 Enhanced mobile terminals without a Data Expansion Head Enhanced, the
jumper between pins 6 and 15 of the junction box (connector 5) should be removed.
Table 9 Jumper on Accessory Connector
MTM800 Enhanced Mobile Terminal Fit Jumper Pins 6-15? Use Junction Box RS232 PEI?
With Data Expansion Head Enhanced Yes
No
Use the Data Expansion Head
Enhanced 9-pin PEI instead.
Without Data Expansion Head Enhanced No Yes
To Next Page
Loading...
