Motorola MTX8250 - Programming the Radios Call Lists; Programming the Telephone List Numbers

47
English
RADIO CALLS
(TRUNKED
OPERATION ONLY)
PROGRAMMING THE RADIO’S
CALL LISTS
Programming the Telephone List Numbers
This feature allows you to use the radio’s keypad
to change the telephone numbers assigned to
any of the telephone list members. Each phone
numbercanhaveupto16digits.
To change the telephone list
1 / until PROG is
displayed.
2 l (the softkey
below
PROG).
3 ; (the softkey below
PHON). The display
shows the first
programmable member
of the telephone list.
4 / or ,,
—or—
Use the keypad to enter the desired member’s
position number (1 to 19) to view the other
members of the telephone list.
PROG
SCAN PHON CALL
FIRE DEPT
5 Whenyoustopona
member of the list, the
display will alternate
between showing the
member’s name and
telephone number.
Alternates between:
and
6 Press the select key to enter edit mode.
7 A short press would
enable the editing of the
telephone number. The
display shows the cur-
rent member’stelephone
number.
8 A long press would
enable the editing of the
member’s name. The
display shows the cur-
rent member’s name.
9 Use any of the alphanumeric keys to make
the changes. The blinking cursor indicates the
position of the next number to be added. If
you require a pause in the phone dialing
sequence (to allow for a delay), you can do so
by first pressing the * key, followed by
pressing the # key. The display will show a
P
for pause.
POLICE DEPT
5556213
5556213
POLICE DEPT