57
English
SCAN
Notes:
• The programming-mode annunciator, K,
is displayed while list view mode is active.
• The scan status annunciator, G, appears,
indicating that a scan list is being viewed.
Programming a Scan List
The program scan list feature allows you to
program the members of the scan
list
associated with the currently selected mode.
To program a scan list
Notes:
• The programming-mode annunciator, K,
is displayed while program mode is active.
• The scan status annunciator, G, appears,
indicating that a scan list is being viewed.
1
/ until PROG is
displayed.
2
l (the softkey
below
PROG).
3 l (the softkey
below
SCAN). The
display shows the
current mode
selected.
For example:
4 Use the mode selector knob to select the
required talkgroup zone.
PROG
SCAN PHON CALL
FIRE DEPT
5 , or / to select the required zone. If
the scan status annunciator, G,is
displayed, the mode is part of the scan list.
6 Press the select key to enable or disable the
scan mode.
7 After making all the changes, select the
required operating mode.
8 Press .,orthePTT button, or turn the
Mode Selector knob to commit all the
changes made.
To Next Page
Loading...
