49
English
RADIO CALLS
(TRUNKED
OPERATION ONLY)
Note: The programming-mode annunciator,
K, blinks while program mode is
active.
In the edit mode, the , keyfunctionsasa
backspace key. Pressing it will erase the
previous digit, and the cursor will move to the
4 / or ,
—or—
Use the keypad to enter the desired mem-
ber’s position number (1 to 19) to view the
other members of the call list.
5 Whenyoustopona
member of the list, the
display will alternate
between showing the
member’s name and
radio ID number.
Alternates
between:
and
6 Press the Select key to enter edit mode.
7 A short press would
enable the editing of the
radio ID. The display
shows the current mem-
ber’s radio ID number.
8 A long press would
enable the editing of the
member’s name. The
display shows the
current member’s name.
CT CHAN
ID: 753951
ID: 753951
CT CHAN
9 Use any of the alphanumeric keys to make
the changes. The blinking cursor indicates the
position of the next number to be added.
10
When you have finished changing the num-
ber, press the Select key again. The change
is saved in the radio’s memory.
11 You are returned to step
5. The display will again
alternate between
showing the member’s
name and radio ID
number. You can now
change additional
numbers.
Alternates between:
and
12 When you have finished making changes,
press . to exit program mode.
13 The radio will return to
the home display.
CT CHAN
ID: 753853
PLANT POLICE
To Next Page
Loading...
