Motorola One Fusion User Manual

Have signal, but can’t make calls
1. Turn your phone off and then on again.
Press & hold the Power button, then touch Power off. Then turn it on to establish a new connection
with the network.
2. Clear the cache for the Phone app.
3. Use safe mode to see if apps you installed are causing the issue and uninstall as needed.
4. Check if a software update is available for your phone.
5. Reset the phone.
Consistent busy signal
Outbound calls
1. If you hear a fast busy signal when you call a number, all cellular circuits may be in use, preventing the
call from going through. Try calling again later.
2. If you hear a fast busy signal every time you call the same number, your number may be blocked by an
app. Try calling from a different number.
Incoming calls
If you have a signal and can make calls, but callers tell you they consistently get a busy signal when calling
you, check that you haven’t blocked their numbers.
Fix issues : Call and SIM issues 287

Motorola One Fusion Specifications

General

Display	6.5 inches, IPS LCD
Resolution	720 x 1600 pixels
Processor	Qualcomm Snapdragon 710
RAM	4 GB
Storage	64 GB
Rear Camera	48 MP + 8 MP + 5 MP + 2 MP
Front Camera	8 MP
Battery	5000 mAh
Operating System	Android 10
Weight	202 g
Colors	Emerald Green, Deep Sapphire Blue
SIM	Dual SIM (Nano-SIM, dual stand-by)
Network	GSM / HSPA / LTE