Motorola One Fusion User Manual

Connect with Wi-Fi Direct
If you have a device, like a printer or TV, that supports Wi-Fi Direct, you can connect your phone without a
wireless router or cable.
When you turn on your phone’s Wi-Fi, Wi-Fi Direct is automatically enabled.
To connect to a Wi-Fi Direct device:
1. On the device you want to connect, set up Wi-Fi Direct. For instructions, see that product's user guide.
2. On your phone, go to Settings > Network & internet > Wi‑Fi > Wi-Fi preferences.
3. Touch Advanced > Wi-Fi Direct.
You'll see a list of Wi-Fi Direct devices that are within range and compatible.
4. Tap the device’s name to connect.
Settings : Network and internet 155

Motorola One Fusion Specifications

General

Display	6.5 inches, IPS LCD
Resolution	720 x 1600 pixels
Processor	Qualcomm Snapdragon 710
RAM	4 GB
Storage	64 GB
Rear Camera	48 MP + 8 MP + 5 MP + 2 MP
Front Camera	8 MP
Battery	5000 mAh
Operating System	Android 10
Weight	202 g
Colors	Emerald Green, Deep Sapphire Blue
SIM	Dual SIM (Nano-SIM, dual stand-by)
Network	GSM / HSPA / LTE