48
basics
Tip:
WANT TO SHOUT YOUR MESSAGE? Press
0
in a text
entry screen to change text case to no capital letters (
U
), next
letter capital (
V
with
k
,
n
,
h
, or
q
), or all capitals (
T
with
i
,
o
,
f
, or
l
).
iTAP
®
mode
Press
#
in a text entry screen to switch to iTAP mode. If you
don’t see
j
or
p
, press
M
>
Entry Setup
to set iTAP mode as
your primary or secondary text entry mode.
iTAP mode lets you enter words using one keypress per letter.
The iTAP software combines your keypresses into common
words, and predicts each word as you enter it.
For example, if you press
7764
, your display shows:
•
If you want a different word (such as
Progress
), continue
pressing keypad keys to enter the remaining characters.
442
49
basics
•
To enter numbers quickly, press and hold a number key to
temporarily switch to numeric mode. Press the number
keys to enter the numbers you want. Enter a space to
change back to iTAP mode.
•
Press
1
to enter punctuation or other characters.
tap mode
Press
#
in a text entry screen to switch to tap mode. If you
don’t see
g
or
m
, press
M
>
Entry Setup
to set tap mode as your
primary or secondary text entry mode.
To enter text in tap mode, press a keypad key repeatedly to cycle
through the letters and number on the key. Repeat this step to
enter each letter.
For example, if you press
7
one time, your display shows:
449
50
basics
When you enter three or more characters in a row, your phone
may guess the rest of the word. For example, if you enter
prog
your display might show:
•
The first character of every sentence is capitalised. If
necessary, press
S
down to change the character to
lowercase before the cursor moves to the next position.
•
Press
S
to move the flashing cursor to enter or edit
message text.
•
If you don’t want to save your text or text edits, press
u
to exit without saving.
•
Tap exten ded
mode cycles through additional special
characters and symbols as you repeatedly press a keypad
key.
numeric mode
Press
#
in a text entry screen until you see
W
. Press the
number keys to enter the numbers you want.
443
51
basics
symbol mode
Press
#
in a text entry screen until you see
[
. Press a keypad
key to show its symbols at the bottom of the display. Highlight
the symbol you want, then press the
Select
key.
volume
Press the volume keys to:
•
turn off an incoming call alert
•
change the earpiece volume
during a call
•
change the ringer volume from
the home screen
Tip:
Sometimes silence really is golden. That’s why you
can quickly set your ringer to
Vibrate
or
Silent
by pressing
the down volume key repeatedly in the home screen.
navigation key
Press the
navigation key
S
up, down,
left, or right to scroll and highlight menu
items. When you highlight something,
press the
centre key
s
to select it. The
centre key usually does the same thing as
the right soft key.
To Next Page
Loading...
