Motorola PIP1010 Connect - Page 4

4
4. View the baby through your device
Minimum system requirement of your device
• Android™ System: Version 7.0 or above
• iPhone® iOS: Version 11.0 or above
• High Speed 2.4GHz (Wi-Fi®) Internet: At least 0.6 Mbps upload
bandwidth per camera (you can test your internet speed on this site:
http://www.speedtest.net).
Connect to Wi-Fi® and use the Nursery App
1. Scan the QR code with your smart device and download the Motorola
Nursery App from App Store for iOS devices or from Google Play™ Store
for Android™ devices.
2. Install the App on your device.
3. Follow the on-screen instructions to run and sign up or log in to the App.
4. Open the Motorola Nursery App on your compatible smartphone.
5. Follow the in-app instructions to create your account and connect the
camera to your device.
6. When the connection is successfully established, you can remotely adjust
the camera with your device.
Note
If the connection is lost, check your Wi-Fi® settings and reconnect your Wi-Fi®
if necessary. Ensure the camera unit is switched on. Wait for a few minutes for
the camera unit to reconnect with your device.
View your camera
from any compatible
device remotely
Camera
Connect to internet
via Wi-Fi
®
router
PIP1010 CONNECT_QSG_EN_AE_v1.indd 4PIP1010 CONNECT_QSG_EN_AE_v1.indd 4 2023/10/23 14:162023/10/23 14:16