What to do if Motorola Battery Charger shows blinking red?
If the Motorola Battery Charger LED is blinking red, it means the battery is either unchargeable or not making proper contact. You should check the battery contacts and replace the battery if needed.
General| Type | Desktop Charger |
|---|---|
| Number of Pockets | 1 |
| Compatibility | Motorola Two-Way Radios |
| Input Voltage | 100-240 VAC |
| Chemistry | NiMH/Li-Ion |
| Compatible Models | Motorola CP Series |
| Compatible Battery Type | Li-Ion |
| Charging Time | Approximately 3 hours |
Crucial safety warnings for charger operation, handling, and accessories.
Table detailing compatible kits, power sources, and transformer part numbers.
Table 3 outlines LED colors and their corresponding battery/charger status indications.
Troubleshooting steps for when the charger displays no LED indication.
Steps to resolve issues when the charger's LED blinks red.
Explanation of blinking yellow LED, indicating temperature or voltage issues.
To Next Page
