10
English
Red Fast
Flash
Fault
• Excessive Power
Supply Voltage
• Battery (+) or Battery
(-) Open or Shorted
Together
• Thermistor short to
Battery(-)
• Battery Under-
Voltage Recovery
Timeout (15 minutes)
• Charging Issue
Remove the battery from the
pocket. Inspect the charger
and battery contacts to ensure
they are clean. Reinsert the
battery.
If the indication continues,
disconnect the power supply
from the charger. Verify that
an authentic Motorola
Solutions power supply is
being used. Inspect the power
supply and charger
connectors to ensure they are
clean and ready for use.
Connect an authentic
Motorola Solutions power
supply to the charger.
If the indication continues, try
using a different Motorola
Solutions authorized battery.
If the indication continues with
a different battery, contact
your Motorola Solutions
representative.
Table 3: Charger LED Indicator
68012007093.book Page 10 Tuesday, October 8, 2013 4:41 PM
To Next Page
Loading...
