To Next Page

To Previous Page

English

GETTING STARTED

SELECTING A ZONE

A zone is a group of up to 16 channels. Before

you can access a channel in a zone, you must

select the zone in one of two ways:

Method 1 (if programmed by your dealer [see

pages 4 - 5])

Method 2 (enhanced keypad microphone

required)

SELECTING A RADIO

CHANNEL

Your radio offers 64 channels (4 zones of 16

channels each).

Note: Due to government regulations, some

channels may not be programmed.

See your dealer for more information.

There are three ways to select a channel:

Method 1

Method 2 (if programmed by your dealer [see

pages 4 - 5])

1 Press the Direct Zone Access button.

z until you reach the desired zone.

3 Press the Direct Zone Access button to

select the zone.

1 Press the Menu/Enter button to enter Menu

Mode.

z until

3 Press the Menu/

Enter button to

select

z until you see the desired zone

name.

5 Press the Menu/Enter button to select the

zone.

1 Select the appropriate Zone, if required.

z until you reach the desired

channel, shown on the LCD display.

English.book Page 10 Wednesday, July 21, 1999 1:42 PM

Motorola PRO5100 Manual

Other manuals for Motorola PRO5100