Motorola r765 - Exit Mototalk; Set a Channel; Set a Code

94
MOTOtalk
TM
channel you are set to appears on the third
line of the display.
Note: When switching from the network to
MOTOtalk, the last channel and code that
were set appear on the MOTOtalk idle screen.
While in MOTOtalk, this icon
m appears on
the display, indicating that there is no network
signal and MOTOtalk is active.
exit MOTOtalk
1 From the MOTOtalk idle screen, press
M .
2 Scroll to MT Options and press r .
3 Select Exit MOTOtalk .
Switching to Network Please Wait displays. After a few
seconds, the network idle screen appears.
set a channel
1 From the MOTOtalk idle screen, press -
under Edit .
2 Scroll to Channel .
3 Press - under Edit .
4 Select a channel.
5 When you are finished, press - under
Back to return to the MOTOtalk idle screen.
set a code
1 From the MOTOtalk idle screen, press -
under Edit .
2 Scroll to Code .
3 Press - under Edit .
4 Select a code.
5 When you are finished, press - under
Back to return to the MOTOtalk idle screen.