Motorola r765 - Page 38

30
calls
2 Enter the Set name and press r .
3 To assign a knob position to a Talkgroup or
MOTOtalk in the new Set, press
- under
Details and continue as explained on page
26.
delete set
Find it: M > u > 2-Way Radio > Knob Position
1 Press M and scroll to Choose Active Set .
2 Scroll to the set you wish to delete.
3 Select Delete Entry.
4 Press - under Yes.
quick set change
1 In the network idle screen turn the
Talkgroup knob.
2 Press - under Chg Set.
Note: Chg Set is available only if 2 sets or more
are defined in the handset.
3 Scroll to the required set.
4 Press r .
change set via main menu
Find it: M > u > 2-Way Radio > Knob Position
1 Press M .
2 Press r to Choose Active Set .
3 Scroll to the required set and press r .
join a hub
1 Turn the Talkgroup knob to reach the
required channel number and Talkgroup
alias.
or
Press
# and enter the Hub number using
the keypad.