Motorola RDM series MURS User Manual

ADVANCED
CONFIGURATION
English
46
Reading Frequency Values
The Frequency value is only one digit as RDM
Series MURS Two-Way radios have 5
predefined frequencies.
To read frequency values:
1. From “Idle” Advanced Configuration Mode,
short press the PTT button to hear the first
value (Refer to "Advanced Configuration
(RDM2020 Model)" on page 44). This value
corresponds to the frequency's first digit value.
2. Short press the PTT button to read CTCSS/DPL
values.
Reading CTCSS/DPL Values
When reading the values for CTCSS/PL Codes
the radio signals the digit codes each time the
PTT button is short pressed. The RDM Series
have up to 213 codes available (Refer to
"Frequency and Code Charts" on page 50).
The following is an example of the order in
which the radio signals the “118” CTCSS/DPL
code:
To read CTCSS/DPL Values:
1. Short press the PTT button. The radio signals
the first digit “1” .
1
PTT
Long
PTT
Long
PTT
PTT
Frequency
First
Digit
First
Digit
Third
Digit
Second Digit
118

Motorola RDM series MURS Specifications

General

Brand	Motorola
Model	RDM series MURS
Category	Two-Way Radio
Language	English