80
Channel
Aliasing
Yes N/A Yes N/A OFF
Only Display Models. To enter or exit Channel
Aliasing mode press PTT and buttons
simultaneously while turning radio ON for 3 sec.
After editing, to exit and save, long press the PTT.
Note: To edit, refer to Programming Features/
Editing Channels.
Channels Yes Yes Yes Yes Model Dependant
You can select channels using the Channel Selector
Knob (non-display models) or the (MENU)
button (display models). You can also add or delete
channels using the CPS.
Note: Enabling/disabling channels via CPS
automatically affects the Maximum Channels you
are able to program via front panel.
Features
Programmable Via
Advanced
Configuration
Programmable via
CPS
Default Value Programming Tips
Display
Non-
Display
Display
Non-
Display
To Next Page
Loading...
