motorola SLVR with iTunes®
Pair Link Headset
Press the Menu key.
1
Scroll to Connection,
then press the center
navigation key.
3
Press the center
navigation key.
4
Scroll to Power, then scroll
right to turn your phone’s
Bluetooth® feature on.
Tip: To extend battery life,
turn Bluetooth power off
when not in use.
6
Scroll to Handsfree,
then press the center
navigation key.
9
Press the center
navigation key.
10
Press the center
navigation key.
11
Press Yes.
12
Enter the passkey 0000,
then press Ok.
When pairing is
successful, the light on
the headset changes from
steadily lit to fl ashing.
13
To confi rm your phone and
headset are successfully
paired and operating
properly, put the headset
on and make a call. If your
phone and headset are
successfully paired, you
will hear ringing.
14
Scroll to Settings,
then press the center
navigation key.
2
Press and hold the Call
button on the headset until
the light turns on and
remains steadily lit.
If the light is fl ashing or does
not remain steadily lit, make
sure the headset is fully
charged and repeat this step.
If you are using a headset
with a folding microphone,
quickly unfold the microphone
so it is fully extended. The
light should remain steadily lit.
7
Scroll to Setup,
then press the center
navigation key.
5
Press Back.
8
To Next Page
Loading...
