How to unlock my Motorola StarTAC Cell Phone when it says 'Locked'?
If the display of your Motorola Cell Phone says 'Locked', you can unlock it by entering the last three digits of your cellular number. If that doesn’t work, use the factory preset lock code: 123.
How to turn on my Motorola StarTAC if it's not responding?
If your Motorola Cell Phone doesn't turn on when you press the power button, make sure you press and hold it until the display appears and you hear an audible alert. Also, verify that a battery is installed and charged.
What to do if Voice Mail doesn't work on my Motorola Cell Phone?
If your Motorola Cell Phone fails to connect to Voice Mail (or use a paging service, a calling card, etc.), you might have turned off the Scratchpad tones. To resolve this, follow the directions 'Turning Scratchpad Tones On and Off' on page 74 to turn the Scratchpad tones on.
Why calling card doesn't work on my Motorola StarTAC Cell Phone?
If your Motorola Cell Phone fails to place a calling card call using the internal Phone Book, it could be due to disabled Scratchpad tones or incorrect storage of calling card information. First, follow the directions in 'Turning Scratchpad Tones On and Off' on page 74 to turn the Scratchpad tones on. Then, check that you stored your calling card information correctly, ensuring numbers are separated by pauses. Follow the instructions on 'Storing Calling Card Information' on page 55, re-enter your calling card information, and store it in the same memory location.
What to do if I get a fast busy signal on my Motorola Cell Phone?
If you receive a fast busy signal when placing a call on your Motorola Cell Phone, it's possible the cellular system is overloaded. To resolve this, you can press the designated button to end your call attempt, or press the º button and try the call again later.
Why does my Motorola Cell Phone battery drain so fast?
If your Motorola Cell Phone battery isn’t lasting as long as expected, it could be due to certain power-demanding features or extreme temperatures. To maximize battery life, fully charge the battery, even leaving it in the charger for an extra hour after the light turns green. Consider turning on Power Save Mode. Also, avoid exposing your phone to extreme temperatures by taking it with you when you leave your car.
Why does my Motorola StarTAC Cell Phone make alternating tones when I try to call?
If you tried to place a call and received an alternating high/low tone on your Motorola Cell Phone, you might have dialed the number too soon after turning the phone on. Wait until the 'NS' light stops blinking before placing a call.
General| Release Year | 1996 |
|---|---|
| Form Factor | Clamshell |
| Weight | 88 g |
| Dimensions | 94 x 55 x 19 mm |
| Display Type | Monochrome graphic |
| Network Technology | GSM |
| SIM | Mini-SIM |
| Talk time | Up to 3 hours |
| Phonebook | 99 entries |
| Networks | GSM |
| Battery type | Li-Ion |
| Internal Memory | No |
| Colors | Black |
| Battery | Removable |
Highlights new features and advancements in the TDMA StarTac phone.
Details the exceptional features of the TDMA StarTac phone that enhance user experience.
Provides crucial safety guidelines and RF exposure information for wireless phone usage.
Lists and describes the typical contents included with the TDMA StarTac phone package.
Details various optional accessories available for the TDMA StarTac phone.
Explains the physical components and status indicators of the TDMA StarTac phone.
Guides users on how to install and manage batteries for the TDMA StarTac phone.
Explains battery types, talk-time, standby-time, and sleep mode functionality.
Describes how to check the remaining battery charge and understand low battery warnings.
Provides instructions for charging the phone's batteries using different methods.
Covers basic operations like turning the phone on/off and power on greetings.
Explains the functionality and usage of the phone's Smart Button for various operations.
Step-by-step guide on how to place a phone call using the TDMA StarTac.
Instructions on how to properly end a phone call.
Details on how to answer incoming calls and manage unanswered call indicators.
Explains the meaning of various status indicators displayed on the phone screen.
Instructions on how to redial previously dialed numbers and manage call attempts.
Explains how to adjust earpiece, keypad, and ringer volumes, and mute the microphone.
Explains how the phone's internal Phone Book is organized and its capacity.
Guides users on how to store phone numbers and associated names in the Phone Book.
Details methods for recalling stored phone numbers by name or memory location.
Introduces quick dial features like Super Speed Dial and Turbo Dial.
Explains how to use the phone's scratchpad for quick notes and number storage.
Describes the different ways the phone notifies users about new incoming messages.
Explains the indicators for unread, emergency, and urgent messages.
Instructions on accessing and reading messages stored in the message center.
How to call back a number embedded within a received text message.
Explains how to protect important messages by locking and unlocking them.
Guides users on how to delete individual or all messages from the message center.
Explains how to navigate through the phone's menu system using the keys.
Introduces visual "road maps" that help users navigate the menu structure.
How to recall entries using the phone's menu system.
How to store numbers and names using the menu system.
Features for storing numbers with pauses for automated systems.
Instructions on how to make calls using stored calling card information.
Instructions on how to edit existing entries in the phone's memory.
How to check the phone's own number on the display.
How to set preferences for displaying names versus numbers in the phone book.
How to view the duration of the most recent call.
How to track accumulated air-time that can be reset.
How to view the phone's total air-time since activation.
Instructions on how to reset the call timer, typically for billing cycles.
Feature to automatically display call duration during and after calls.
Sets an audible beep 10 seconds before the end of each minute during a call.
Sets timed audible beeps at user-defined intervals during calls.
Sets a single audible beep 10 seconds before the end of a call.
How to choose alert modes: vibrate, ring, both, or neither.
How to choose from nine different ringer styles for incoming calls.
How to silence the audible feedback from keypad presses.
How to silence tones sent to automated systems when using the scratchpad.
Activates a feature to search for a private voice channel for calls.
Sets the phone to lock itself each time it is turned off.
How to manually lock the phone to prevent unauthorized use.
Instructions on how to unlock the phone using a lock code.
How to set up a priority call feature for emergency contacts.
Overview of sub-menu options for phone security features.
How the phone provides real-time updates on waiting voice mail messages.
Allows viewing of incoming caller numbers and stores last ten calls.
How to select between digital, analog, or dual channels for calls.
How to switch between two programmed cellular numbers to reduce roaming.
How to choose the type of cellular system the phone accesses (e.g., Standard, Reversed).
Allows users to review settings changed from default factory configurations.
Options for managing incoming calls, such as blocking or automatic answering.
Shows the System ID number of the currently accessed cellular system.
Adjusts the speed at which incoming messages scroll across the display.
Configures the dedicated Message key for messaging or one-touch dialing.
Provides solutions to common problems encountered while using the phone.
Definitions of technical terms and features used in the manual.
To Next Page
