129
Caller ID
This feature allows you to view the number of the calling
party in the phone’s display while the phone is ringing.
Additionally, your TDMA StarTac stores the telephone
numbers of the last ten incoming calls.
Should the caller’s phone number match a phone number
that you have stored in the phone’s memory, the phone will
automatically display the name associated with that phone
number. The display of the name-tag or phone number is
controlled through your setting of the Name Preference
feature. For more information on Name Preference, see
page 89.
If you subscribe to call waiting and receive a call while
another call is in progress, you will hear a call waiting tone
and the caller’s number will appear on the display. The
number will automatically be stored and can be viewed
after ending the call, using the procedure described on the
next page.
If the caller has restricted transmission of the phone
number, your phone will display, “
Private.” If the Calling
Number ID information is not available to the cellular
network, “
No ID” will display.
You can store any number contained in your Caller ID
memory to a memory location in the same way you would
save any phone number. Once the correct number is
displayed, press
¬ and a memory location or « to
autoload. See the Phone Book section on page 50 of this
manual for more information on storing phone numbers.
Note:
Caller ID is not available in all markets. Contact your
Service Provider for availability information.
To Next Page
Loading...
