25Base settings
6.5 Recall mode
Depending on your country and network operator, your S12 has the recall time set as 600
ms (
TIMED BR, 2
). It is unlikely that you need to change this setting unless advised to do so.
1. Press
m, scroll d to
SETUP
and press m.
2. Scroll
d to
RECALL
and press m.
3. Press
u or
d
to select
TIMED BR, 1
(short flash time) or
TIMED BR, 2
(long flash time)
and press
m
to conrm.
6.6 Restore default settings
You can restore your S12 to its default (original) settings.
All the handsets that are registered to the base will be retained.
IMPORTANT
Resetting your phone to its default settings will delete all entries in the Phonebook and
Calls list. All handset and base settings will also be reset.
1. Press
m, scroll d to
SETUP
and press m.
2. Scroll
d to
DEFAULT
and press m.
3. Enter the 4 digit PIN code (default = 0000) and press
m. The display shows
CONFIRM ?
.
4. Press
m to conrm or B to return to the previous menu. Your S12 will restart
automatically.
6.7 Emergency default
If you have lost your PIN code, you can still restore your S12 to its default settings.
1. Remove the batteries from the handset.
2. Press and hold
* while replacing the batteries. The display shows
DEFAULT.
3. Press m to conrm. Your S12 will restart automatically.
6.8 Eco mode
Your S12 oers ECO mode function which reduces the transmitted power and energy
consumption when switched on.
To switch Eco mode on:
1. Press
m, scroll d to
SETUP
and press m.
2. Scroll
d to
ECO MODE
and press m.
3. Press
u or d to select
ON
or
OFF
and press m to conrm.
To Next Page
Loading...
Need help?
General
