19
Troubleshooting
Troubleshooting
Problem Solution
No Power Reposition, replace or recharge batteries.
Erratic Display Reposition, replace or recharge batteries.
Message Not
Tra n s m i t te d
Make sure button is completely pressed while you transmit.
Reposition, replace or recharge batteries.
Shared Channel may be in use, try another Channel.
Message Not
Received
Confirm radios have same Channel settings and/or Interference
Eliminator Code (helps minimize interference). (T5400)
Make sure
M
is not inadvertently being pressed.
Reposition, replace or recharge batteries.
Obstructions, operating indoors or in vehicles may interfere with
communication. Change your location.
Check to make sure volume is turned up.
Set Eliminator Code to
0 on a T5400 to communicate with a
T5300.
6864110r09o.book Page 19 Friday, December 21, 2001 12:04 PM
To Next Page
Loading...
