Getting Started
22
• Position the charger with the hook on the light
indicator end over the left slot.
• Snap the hook on the cord end into the right
slot, clamping the charger onto the charging
dock contacts.
• Plug in the charger.
• Place the radio, or the NiMH battery in the
charger adapter cover, into the charging dock
until you hear a click.
• When the light indicator turns solid green, the
battery is fully charged.
Light Indicator
Charging Dock
Charger
1 T6200.book Page 22 Tuesday, March 20, 2001 10:41 AM
To Next Page
Loading...
