Alerts
33
Ring Only (T6200 Only)
The ring feature rings the call tone you’ve selected to notify you of two-way radio
reception. When you set this feature, the radio produces the call tone you’ve
selected each time you receive a two-way radio transmission.
If you select Y, the
B will remain on the display after you exit the menu.
To set the Ring feature, press
\ until B is displayed and then
press
[
or
]
to select
n or Y.
1 T6200.book Page 33 Tuesday, March 20, 2001 10:41 AM
To Next Page
Loading...
