Other Important Features
46
Reset
You can reset your radio’s menu settings to the factory settings by turning it on while
pressing and holding
M
and
\
or
M
and
)
.
Simple Menu
Simple Menu allows you to limit the number of menus displayed (Channel, Code,
and Call Tones) to allow for simpler radio operation. The Scan and Weather
features, along with most of the radio turn-on sequences (See page 25), are also
disabled to prevent accidentally changing the radio’s mode of operation.
If you want the radios in your group to keep the same settings that you have on your
radio, press
\
as you turn each radio on. Simple Menu increases the menu time-
out to 60 seconds. To turn off Simple Menu, press
\
as you turn on the radio.
If you want to set up Simple Menu for inexperienced users, without advanced
features activated such as Eavesdrop Reducer and QuieT6000, reset their radios to
the original factory settings by either pressing
)
and
M
or by pressing
M
and
\
while turning on their radios. Then activate Simple Menu by turning their radios
off and then
back on while pressing
\
.
1 T6200.book Page 46 Tuesday, March 20, 2001 10:41 AM
To Next Page
Loading...
