Motorola TETRA CEP400 - Selecting TMO or DMO Operation

26
English
Selecting TMO or DMO Operation
Entering TMO or DMO
Enter TMO or DMO in one of the following ways:
• From the Home display press Optns and select Direct Mode if
the CEP400 is in TMO.
• From the Home display press Optns and select Trunked Mode if
the CEP400 is in DMO.
• Press and select More... > Networks > Trunked Mode if
the CEP400 is in DMO.
• Press and select More... > Networks > Direct Mode if
the CEP400 is in TMO.
• Press the TMO/DMO one-touch button (if programmed by your
Service Provider).
You can make and receive the following types of calls when the
CEP400 operates in Trunked Mode:
• Group Calls
• Private Calls
• Phone Calls
• PABX Calls – local (office) extension calls
• Emergency Calls
• Emergency Private Calls.
You can make and receive Group and Private Calls
when the
CEP400 operates in Direct Mode. This includes Emergency Group
Calls.
The CEP400 returns to the Home display when there is no activity
for a few seconds.
Your terminal can alert you of an incoming call. Select the alert
settings in the Vibrate menu and Tones menu items.
MENU
MENU