37
English
Messages
Sending a Status Message
Select the desired group, then press and select
Messages > Send Status. Select status and press or PTT.
Sending a User-defined Message
Press and select Messages > Templates. Scroll and
choose your required template. Select Send, or press or PTT.
Select your mail recipient or enter number. Select Send, or
press or PTT to send the message.
Sending a Predefined Message
Press and select Messages > Predefined. Scroll and
choose your required template. Press and select View to
view the message. Select Send, or press or PTT to send the
message.
Handling New Incoming Text Messages
Your CEP400 will alert you of an incoming message and enter the
inbox automatically, if there is no on-going activity in the terminal.
Scroll to the message and select Read soft key. To read a long
message, press More to read the next page and Back to return to
the previous page.
Then press and select to Store / Delete / Delete All /
Forward.
For Long Text Messages Store and Forward options are not
available.
To Next Page
Loading...
