11
English
The LED Status Indicator
The LED indicator shows the states of your MTM800.
To Enter the Menu Options
1. From any mode, press .
2. Scroll to the required option, press Ok or to select.
3. Alternatively, key the numbers of the required option,
typically 2 2 4 to reach 4 Mem Usage.
To Exit the Menu Options
Press Back or .
Indicator Status
Solid green In use
Flashing green In service
Solid red Out of service
Flashing red Connecting to a network/Entering DMO
Solid orange Transmit Inhibit (TXI) in service /
Channel busy in DMO
First solid then
flashing orange
Incoming call
No indication Switched off
Your MTM800 may exit if no key presses are detected for
a time-out period.
Key Alphanumeric Mode
To Next Page
Loading...
