English
wait for the Emergency Mic On message
to be displayed, and talk without
pressing
PTT.
To exit Emergency Mode press and
hold
Back.
Answering a Call
Your MTM800 switches to the mode of
the incoming call and starts ringing. To
answer the call,
• press for a Phone or PABX call or
• press PTT for all other calls.
Sending a Status Message
Sending a New Message
Sending a User defined Message
Sending a Predefined Message
Handling New Incoming Text
Messages
The icon will flash on your display
and the MTM800 sounds a tone (in Auto
Mode Switch – Pending). For details see
the Menu Messages section in the User
Guide.
Handling Old Messages
Last Number Redial
In Private Mode, press PTT to call the
last called number.
In Phone/PABX mode, press to
display last called number, or a list of
last called numbers. If list present, scroll
to desired number. Press again
to call.
Using the Menu
Press
Ok
Select
Status
Press PTT
to send
Select 1 New
Press Ok
Write
message
Press Optns
and select Send
Select recipient
or enter number
Press
PTT
Select
2 Templates
Press Ok
Scroll through
templates and
select one
Press Optns
and select Send
Select recipient
or enter number
Press
PTT
Select
3 Predefined
Press Ok
Scroll through
templates and
select one
Press
Edit
Type required
information
Press
PTT
Press
Ok
Scroll
messages
Read
Erase /
Exit
• Entering the menu: Press
• Scrolling through the menu:
Press or .
• Selecting a menu option: Press
Ok.
• Exiting the menu: Press
Back.
Press
Ok
Scroll
messages
Select
Optns
Read /
Erase /
Erase All
To Next Page
Loading...
