English
8
Normal Channel
Auto Power
Off
Normal
1-8
Off/60
/120/180
Call
Tone
VOX
Level
Sub-
Code
0-121
OFF, 1-
5
1-5
Select Menu
Your radio navigates through Select Menu as
follows:
Choosing a Channel
Your radio has 8 channels and 121 Sub-codes
you can use to talk to others. In order to speak
to someone, each of you must set to the same
channel and Sub-code.
To choose a channel:
1. Enter the Select Menu. Channel Indicator will
blink.
2. Press the or key to increase or decrease
the channel number displayed. If you press and
hold the or key, the channel number
increase or decrease continuously.
3. Go to Sub-code setting to choose a Sub-code.
Choosing a Sub-code
Allocating a Sub-code to your radio will help to
reduce interference but remember that the
radios that have different Sub-codes set will not
be able to communicate with each other. Each
of the channels 1-8 may have any one of the
codes from 0 to 121.
1. Enter the Select Menu. Advance through the
Select Menu until the Sub-code indicator blinks.
2. Press the or key to increase or decrease
the channel number displayed. If you press and
hold the or key, the channel number
increase or decrease continuously.
3. Exit the Select Menu.
T5 Manual EU.book Page 8 Monday, September 3, 2007 9:30 AM